Application
Only applicable with addressable detector base FDB221 or FDB222.
For recess supply line.
For surface supply line with FDB221 until cable 6 mm in diameter, otherwise use base attachment
FDB291.
Along escape routes, corridors, staircases and is mounted on the wall or on the ceiling.
Function
Acoustic and optical alarming in case of fire alarm, clearly recognizable as danger signal.
Synchronized of acoustic signals with all other alarm sounder devices and sounder bases in the same
detector line (C-NET).
Communication protocol | C-NET |
Operating voltage | 12... 33 VDC |
Operating current quiescent condition – Operating current ton activated – Operating current beacon activated – Operating current ton and beacon activated |
250 μA 3.5 mA 3.5 mA 7.0 mA |
Sounds | 11; 2 activation levels, 3 sound intensities |
Sound intensity | 80... 99 dBA |
Number of flashing pattern | 1 (intermittent) |
Light intensity (unit: candela, cd) at 32 VDC (depending of viewing angle -30… +30 °): – with hood red – with hood orange |
1.27… 3.2 cd 1.1… 2.8 cd |
Ext. alarm indicator | 2 |
Connection terminals | according to the detector base |
Operating temperature | -25... +70 °C |
Storage temperature | -30... +75 °C |
Humidity | ≤95 % rel. |
Color | transparent red, transparent orange |
Protection category EN60529/IEC529 with – Base FDB221 or FDB222 – Base attachment FDB291 – Base FDB221 and sealing element FDBZ295 – Base attachment wet FDB293 |
mounting on the wall with cable feed from bottom –> IP43, otherwise IP40 IP44 IP54 |
System compatibility C-NET | FS720 |
Standards | EN54-3, EN54-17 |
Dimensions | Ø100 x 43 mm |
Approvals | VdS G207156, LPCB 126ar/01, LPCB 126ar/02 |
For alarm sounders and alarm sounder beacons. For recess supply line.
For alarm sounders and alarm sounder beacons. For recess supply line.
For higher protection category. Use only with base FDB221 and for recess supply wiring.
To identify the location address.
For locking the detector to the base.